top of page


Counterbore Machining: Geometry, Tolerances and Callouts
Counterbore machining looks simple on a drawing: a round pocket with a flat floor, a cone at the top of a hole, and a screw that sits where the print says it should. On the shop floor, that simplicity disappears fast. A pocket that is a few thousandths too shallow leaves a head standing proud, a countersink that is 2 degrees off can bind a flat-head screw, and a clearance hole drilled to the wrong fit class can throw off an assembly that passed first article. This guide cover
carystraley
Nov 413 min read
bottom of page
